Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, Astm A500 Structural Tubing, Structural Astm A500 Grade B
DM Special Steel Ltd

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, Astm A500 Structural Tubing, Structural Astm A500 Grade B

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, Astm A500 Structural Tubing, Structural Astm A500 Grade B

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, Astm A500 Structural Tubing, Structural Astm A500 Grade B

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, astm a500 structural tubing, astm a500 structural steel, astm a500 grade b structural tubing, structural astm a500-grade b korea, MAlaysia, carbon steel pipe suppliers in kuwait, carbon steel pipe price list in india, carbon steel pipe large diameter, carbon steel pipe price per ton


structural steel tubing astm a500 grade b, a500 tube dimensions, a500 tube sizes, a500 tube corner radius, a500 tube weight per foot, astm a500 tube dimensions, a500 steel tube dimensions, a500 square tube, a500 round tube, a500 rectangular tube dimensions, a500 rectangular tube, a500 tube, a500 tube steel, astm a500 tube, astm a500 tube tolerances, astm a500 tube sizes, a500 grade b tube


Table Of Content


STRUCTURAL TUBING

Square and Rectangle Tubing ASTM A500 Grade A,B,C

Section Size: 2" x 2" to 12" x 12"
Wall Thickness: .120", .180", .188", .250", .313", .375", .500" 
Lengths: 20', 24', 40', 48', Customer Specific Lengths

Round Tubing ASTM A500 Grade A,B,C

Diameter: 2" to 12"
Wall Thickness: .120", .180", 188", .250", .313", .375", .500"
Lengths: 20', 24', 40', 48', Customer Specified Lengths

Primer Coated Tubing

Availlable in Red, Blue, Grey, and Customer Specified Colors

ASTM A500 TUBING

CHARACTERISTICS

ASTM A500 tube is a standard specification for cold-formed welded and seamless carbon steel structural tubing in round, square and rectangular shapes. ASTM A500 is the most common specification in North America for Hollow Structural Sections (HSS).

APPLICATIONS

ASTM A500 applications include structural supports, building columns, highway signs, oil field services and communication towers.

SIZES

Rectangle

Type: HREW

Widths: Rectangles equivalent to 2” sq through 20”

Round

Type: HREW

  • OD: ¾” – 20”
  • Wall Thickness: .113 - .625 

Square

Type: HREW

  • Widths 2” – 20”      
  • Wall Thickness: .125 - .625

*Typically CREW is available in 065 GA and lighter and OD sizes 2” and under

FABRICATOR COLUMN LENGTHS

Rectangle

Type: HREW
  • Widths: 8" X 6" - 16" X 8" 
  • Wall Thicknes: .250 - .500
  • Lengths: 30', 34', 48' 

Square

Type: HREW

  • Widths: 8" - 12"   
  • Wall Thickness: .250 - .500
  • Lengths: 30', 34', 48'

 

 

 

TYPICAL CHEMICAL PROPERTIES

Grade B

Grade C

Carbon, Max %

0.260

0.230

Manganese, Max %

----

1.350

Phosphorus, Max %

0.035

0.035

Sulphur, Max %

0.035

0.035

Copper, when copper steel is

0.200

0.200

specified, Min %

 

 

 TYPICAL MECHANICAL PROPERTIES

Grade B

Grade C

Tensile Strength, Min psi

58,000

62,000

Yield Strength, Min psi

46,000

50,000

Elongation in 2” Min

23%*

21%**

*.180” wall and over

 

 

**.120” wall and over

 

 

A500 Carbon Steel Structural Tubing

DM Special Steel Ltd offers A500 structural steel tubing in a range of sizes and shapes. The ASTM A500 specification covers cold-formed welded and seamless carbon steel tubing in round, square, rectangular, and “special” shapes for welded, riveted, or bolted construction applications, as well as for general structural purposes.

Request an eQuote or Contact DM Special Steel Ltd today for more information.

The aspects of the ASTM A500 specification that are most important for our purposes include:

Manufacture

ASTM A500 spec states that welded tubing shall be made from flat-rolled steel using electric-resistance welding. Longitudinal butt joints of welded tubing shall be welded across its thickness in such a manner as to assure the structural design strength of the tubing section. Welded structural steel tubing is normally furnished without the removal of inside flash.

Chemical Requirements

Composition, %
Element Grades A, B and D Grace C
  Heat
Analysis
Product
Analysis
Heat
Analysis
Product
Analysis
Carbon, max
0.26 0.30 0.23 0.27
Manganese, max
... ... 1.35 1.40
Phosphorus, max
0.035 0.045 0.035 0.045
Sulfur, max
0.035 0.045 0.035 0.045
Copper, when copper steel
is specified, min
0.20 0.18 0.20 0.18

Tensile Requirements

Round Structural Tubing
  Grade A Grade B Grade C Grade D
Tensile strength, mn, ps (MPa)
45 000
(310)
58 000 
(400)
62 00
(427)
58 000
(400)
Yield strength, mn, psi (MPa)
33 000
(228)
42 000
(290)
46 000
(317)
36 000
(250)
Elongation in 2 in. (50.8 mm), min, %A
25B 23C 21D 23C

Shaped Structural Tubing
  Grade A Grade B Grade C Grade D
Tensile strength, mn, ps (MPa)
45 000
(310)
58 000 
(400)
62 00
(427)
58 000
(400)
Yield strength, mn, psi (MPa)
39 000
(269)
46 000
(317)
50 000
(345)
36 000
(250)
Elongation in 2 in. (50.8 mm), min, %A
25B 23C 21D 23C

Permissible Dimensional Variations

OUTSIDE DIMENSIONS

Outside diameter measurements must be made at positions at least 2” (50.8mm) from either end of the tubing.

For round structural tubing with nominal OD of 1.900” (48.26mm) and smaller, the outside diameter may not vary more than ±0.5%, rounded to the nearest 0.005” (0.13mm), of the specified size. For nominal ODs of 2” (50.8mm) and larger, outside diameter may not vary more than ±0.75%, rounded to the nearest 0.005”.

Square structural tubing and rectangular structural tubing must be measured across the flats and include an allowance for convexity or concavity. Specified dimensions shall not exceed the plus/minus allowances shown in the table below.

Outside Dimension Tolerances For Square and Rectangular Structural Tubing

Outside Large Flat Dimension, in. (mm) Large Flat Dimension Tolerance, A plus and minus, in. (mm)
2½ (63.5) or under
0.020 (0.51)
Over 2½ to 3½ (63.5 to 88.9), incl
0.025 (0.64)
Over 3½ to 5½, inc
0.030 (0.76)
Over 5½ (139.7) 0.01 times large flat dimension

WALL THICKNESS

Minimum wall thickness at any point of measurement shall not be less than 90% of specified nominal wall thickness. Maximum wall thickness, excluding weld seams, shall not be more than 110% of specified nominal wall thickness. Wall thickness of square structural tubing and rectangular structural tubing must be measured at the center of the flat.

STRAIGHTNESS

Permissible variation in straightness for structural tubing is 1/8” times the total length in feet (or 10.4mm times the number of meters) divided by five.

SIDE SQUARENESS

For square structural tubing and rectangular structural tubing, adjacent sides may deviate from 90° by no more than ±2°.

CORNER RADII

For square structural tubing and rectangular structural tubing, the radius of any one outside corner may not exceed three times (3x) the specified wall thickness.

TWIST

For square structural tubing and rectangular structural tubing, the tolerances for twist (variation with respect to axial alignment) are shown in the table below.

Twist Tolerances for Square and Rectangular Structural Tubing

Specified Dimension of Longest Side, in. (mm) Maximum Twist in the First 3 ft (1 m) and in each additional 3 ft
   in. mm
1½ (38.1) and under
0.050 1.39
Over 1½ to 2½ (38.1 to 63.5),incl
0.062 1.72
Over 2½ to 4 (63.5 to 101.6), incl
0.075 2.09
Over 4 to 6 (101.6 to 152.4), incl
0.087 2.42
Over 6 to 8 (152.4 to 203.2), incl
0.100 2.78
Over 8 (203)
0.112 3.11

Twist is measured in one of two ways: 1) By holding down one end of a square/rectangular tube on a flat surface, with the bottom side of the tube parallel to the surface plate of the two corners at the opposite end of the bottom side of the tube; or, 2) By measuring this difference on the heavier sections by a suitable measuring device. Difference in the height of the corners must not exceed the values in the table above.

Square and Rectangular Tubing ASTM A500 Sizes

Outside Dimension Nominal Wall Thickness/Gauge
Square Rectangle .120" .180" .188" .250" .313" .375" .500"
1-1/2" x 1-1/2"       X        
2" x 2"   X X X X      
2-1/2" x 2-1/2" 3" x 2" X X X X      
3" x 3" 4" x 2" X X X X      
3-1/2" x 3-1/2" 4" x 3", 5" x 2" X X X X      
4" x 4" 5" x 3", 6" x 2" X X X X      
  6" x 3"   X X X      
5" x 5" 6" x 4"   X X X X    
6" x 6" 8" x 4"   X X X X X  
7" x 7" 8" x 6"   X X X X X  
8" x 8" 10" x 6"   X X X X X  
Online Inquiry Form

 

 


Pipe Price List in India

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, Astm A500 Structural Tubing, Structural Astm A500 Grade B
  • carbon steel pipe market price
    steel pipe price malaysia
    steel pipe prices melbourne
    price of carbon steel pipe per foot
    price of seamless carbon steel pipe
    price of 4 carbon steel pipe
    price of 30 inch carbon steel pipe
    carbon steel pipe price per tonne
    carbon steel pipe price per pound
    carbon steel pipe prices per foot
    carbon steel pipe prices uk
    carbon steel pipe prices in india
    carbon steel pipe price sheet
    carbon steel pipe scrap price singapore
    seamless carbon steel pipe price list
    seamless carbon steel pipe price
    used carbon steel pipe prices uk
    12 carbon steel pipe price
    16 carbon steel pipe price
    10 carbon steel pipe price
    14 carbon steel pipe price
    16 carbon steel pipe price list
    10 inch carbon steel pipe price
    1/2 carbon steel pipe price
    1 steel pipe price
    24 carbon steel pipe price
    2 carbon steel pipe price
    20 carbon steel pipe price
    steel pipe price 2015
    2 inch carbon steel pipe price
  • carbon steel pipe price per foot
    carbon steel pipe price per ton
    carbon steel pipe price per meter
    carbon steel pipe price in india
    carbon steel pipe price malaysia
    carbon steel pipe price list philippines
    carbon steel pipe price list in india
    carbon steel pipe price per meter in india
    carbon steel pipe price per kg
    carbon steel pipe price list australia
    carbon steel pipe and fittings price list
    carbon steel barrel pipe price brisbane
    carbon steel pipe price chart canada
    cement lined carbon steel pipe price list
    carbon steel pipe fittings price list
    carbon steel pipe fittings price list in india
    carbon steel pipe fittings prices canada
    36 carbon steel pipe price per foot
    16 carbon steel pipe price per foot
    price for carbon steel pipe
    galvanized carbon steel pipe price
    carbon steel pipe price in malaysia
    mild steel pipe price in india
    mild steel pipe price in malaysia
    mild steel pipe price list in india
    steel pipe price in pakistan
    carbon steel pipe price uk
    carbon steel pipe price list uk
    carbon steel pipe price list 2015
    mild steel pipe price list malaysia

Pipe Calculator | Pipe Weight Calculator

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, Astm A500 Structural Tubing, Structural Astm A500 Grade B
  • mild steel weight calculator
    how to calculate weight of pipe in kg/m
    structural steel weight calculator
    ss stainless steel pipe calculator
    ms pipe weight calculation formula in kg
    metal weight calculator free download
    material weight calculation formula
    metal weight formula
    Steel Pipe Weight Calculator
    Flanges Calculator
    stainless steel flange weight chart
    blind flange chart
    large diameter flange weights
    Round Pipe Tube Calculator
    Pipe Weight per Foot Calculator
  • carbon steel pipe calculator
    Pipe Calculator | Pipe Weight Calculator
    Carbon Pipe Weight Calculator From Reliant
    Pipe Weight per Foot Calculator
    Calculating Pipe Weight
    api 5l pipe weight calculator
    Calculator for Pipe Working Pressure
    Pipe Size & Pricing Calculator
    square pipe weight calculator
    Pipe Design Calculator
    flange weight calculator
    wnrf flange weight calculator
    stainless steel flange weight calculator
    weld neck flange weight calculator
    pipe weight calculation formula in mm


We Export to: We Import to:

People Also Search : Online Inquiry Form

Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, astm a500 structural tubing, astm a500 structural steel, astm a500 grade b structural tubing, structural astm a500-grade b, structural steel tubing astm a500 grade b, a500 tube dimensions, a500 tube sizes, a500 tube corner radius, a500 tube weight per foot, astm a500 tube dimensions, a500 steel tube dimensions, a500 square tube

a500 round tube, a500 rectangular tube dimensions, a500 rectangular tube, a500 tube, a500 tube steel, astm a500 tube, astm a500 tube tolerances, astm a500 tube sizes, a500 grade b tube, astm a500 square tube dimensions, a500 steel structural square tube dimensions, tube a500 grade b, a500 steel tube properties, a500 steel structural square tube properties, a500 rectangular tube sizes, a500 round tube sizes, astm a500 round tube, astm a500 rectangular tube dimensions
Astm A500 SHS Pipe | Astm A500 Structural Tubing Dimensions, astm a500 structural tubing, astm a500 structural steel, astm a500 grade b structural tubing, structural astm a500-grade b, structural steel tubing astm a500 grade b, a500 tube dimensions, a500 tube sizes, a500 tube corner radius, a500 tube weight per foot, astm a500 tube dimensions, a500 steel tube dimensions, a500 square tube, a500 round tube, a500 rectangular tube dimensions, a500 rectangular tube, a500 tube, a500 tube steel, astm a500 tube, astm a500 tube tolerances, astm a500 tube sizes, a500 grade b tube, astm a500 square tube dimensions, a500 steel structural square tube dimensions, tube a500 grade b, a500 steel tube properties, a500 steel structural square tube properties, a500 rectangular tube sizes, a500 round tube sizes, astm a500 round tube, astm a500 rectangular tube dimensions, astm a500 rectangular tube, a500 square tube dimensions, a500 square tube sizes, a500 structural tube, a500 square tube tolerances, a500 tube tolerances, a500 tube yield